Pasang usb_modeswitch. Sama ada muaturun dari https://forge.betavine.net/frs/?group_id=12&release_id=247 atau sambung ke internet melalui kabel rangkaian
- Edit /etc/usb_modeswitch dari
########################################################
# Huawei E220 (aka "Vodafone EasyBox II", aka "T-Mobile wnw Box Micro")
# Huawei E270
# Huawei E870
# and probably most other Huawei devices (just adapt product ID)
#
# Two options: 1. removal of "usb-storage" 2. the special control
# message found by Miroslav Bobovsky
#
# Contributor: Hans Kurent, Denis Sutter;DefaultVendor= 0x12d1;
;DefaultProduct= 0x1003# choose one of these:
;DetachStorageOnly=1
;HuaweiMode=1kepada
########################################################
# Huawei E220 (aka "Vodafone EasyBox II", aka "T-Mobile wnw Box Micro")
# Huawei E270
# Huawei E870
# and probably most other Huawei devices (just adapt product ID)
#
# Two options: 1. removal of "usb-storage" 2. the special control
# message found by Miroslav Bobovsky
#
# Contributor: Hans Kurent, Denis SutterDefaultVendor= 0x12d1
;DefaultProduct= 0x1003
DefaultProduct= 0x1446# choose one of these:
;DetachStorageOnly=1
;HuaweiMode=1MessageEndpoint=0x01
MessageContent="55534243000000000000000000000011060000000000000000000000000000" - Tambah fail /etc/udev/rules.d/15-huawei-e1762.rules dengan kandungan seperti berikut
SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1", RUN+="/usr/sbin/usb_modeswitch" - Klik-kanan pada NetworkManager Applet (ikon sebelah kiri/kanan bunyi pada panel GNOME) dan lakukan penetapan Mobile Broadband untuk Maxis. Pilih sahaja tetapan lalai/default
- But semula komputer
- Klik-kanan pada ikon NetworkManager dan pilih Maxis Broadband 1
Jika terdapat sebarang masalah, maknanya konfigurasi tidak betul. Tolong jangan gunakan gedit untuk edit fail konfigurasi.
Terima kasih kepada saudara Muhamad Nazir Samsudin melalui tips beliau di http://darjahsatu.blogspot.com/2009/09/maxis-broadband-with-linux-fedora-11.html
Jika anda malas, muaturun fail berikut > usb_modeswitch
Namakan semula sebagai usb_modeswitch.conf dan pindah ke /etc
6 replies on “Sambung ke internet dengan E1762 pada Ubuntu 9.10”
tak jadi la…kalu pakai kat jaunty dapat tak??
Kalau ada tak dapat dikesan sebagai modem usb, taip arahan berikut sebagai root dan tunggu 2 hingga 3 minit
# usb_modeswitch idProduct=1446 idVendor=12d1
thanks ea….. hurm, dah lame gak cari jalan camane nak connect ni… puas dah google. nnt try…. hopefully berjaya 🙂
Hi guys,
Thank you for the given tip. Thank to whoever figure this out (original source). I paste the live system that I have using the given tip for others to refer.
My system:
distro: Ubuntu Karmic 9.10
kernel: 2.6.31-16
package: usb-modeswitch_1.0.5-1
# lsusb | grep Huawei
Bus 002 Device 004: ID 12d1:1446 Huawei Technologies Co., Ltd.
# usb_modeswitch idProduct=1446 idVendor=12d1
Looking for default devices …
Found default devices (1)
Accessing device 004 on bus 002 …
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached …
Looking for active driver …
No driver found. Either detached before or never attached
Received inquiry data (detailed identification)
————————-
Vendor String:
Model String:
Revision String: @??
————————-
Device description data (identification)
————————-
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
————————-
Setting up communication with interface 0 …
Trying to send the message to endpoint 0x01 …
OK, message successfully sent
Device is gone, skipping any further commands
-> Run lsusb to note any changes. Bye.
# lsusb | grep Huawei
Bus 002 Device 005: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
baru jumpa, dh lama terpikir boleh ke tak… terima kasih byk2, nanti saya sebarkan maklumat ni kpd kwn2 yg lain. 🙂