Selepas upload patch file dalam format zip ke XenServer
- Ekstrak fail zip patch
# unzip XS62E004.zip
- Upload ke master pool (default untuk single server)
# xe patch-upload file-name=XS62E004.xsupdate
5579f1f0-ff83-11e2-b778-0800200c9a66 - Apply patch
# xe patch-pool-apply uuid=5579f1f0-ff83-11e2-b778-0800200c9a66
# xe-toolstack-restart
- Reboot kalau perlu
4 replies on “Patch XenServer (server tunggal)”
Hi!
I’m install xenserver on flash
http://support.citrix.com/article/CTX130111
but.. after XS62E004.xsupdate host after reboot not work..
plz give me result command:
ls /boot
Thanks!
sorry that I could not give you that output since my lab computer had hardware issue.
Thanks. 🙂
i’m find on citrix Knowledge Center
http://support.citrix.com/article/CTX138833
finally got it back on
[root@xserv01 ~]# ls /boot
chain.c32
config-2.6.32.43-0.4.1.xs1.8.0.835.170778kdump
config-2.6.32.43-0.4.1.xs1.8.0.835.170778xen
config-2.6.32.43-0.4.1.xs1.8.0.839.170780kdump
config-2.6.32.43-0.4.1.xs1.8.0.839.170780xen
elf-memtest86+-4.10
extlinux
extlinux.conf
grub
initrd-2.6.32.43-0.4.1.xs1.8.0.835.170778kdump.img
initrd-2.6.32.43-0.4.1.xs1.8.0.835.170778kdump.img.cmd
initrd-2.6.32.43-0.4.1.xs1.8.0.835.170778xen.img
initrd-2.6.32.43-0.4.1.xs1.8.0.835.170778xen.img.cmd
initrd-2.6.32.43-0.4.1.xs1.8.0.839.170780kdump.img
initrd-2.6.32.43-0.4.1.xs1.8.0.839.170780xen.img
initrd-2.6-xen.img
ldlinux.sys
mboot.c32
memtest86+-4.10
menu.c32
System.map-2.6.32.43-0.4.1.xs1.8.0.835.170778kdump
System.map-2.6.32.43-0.4.1.xs1.8.0.835.170778xen
System.map-2.6.32.43-0.4.1.xs1.8.0.839.170780kdump
System.map-2.6.32.43-0.4.1.xs1.8.0.839.170780xen
vmlinuz-2.6.32.43-0.4.1.xs1.8.0.835.170778kdump
vmlinuz-2.6.32.43-0.4.1.xs1.8.0.835.170778xen
vmlinuz-2.6.32.43-0.4.1.xs1.8.0.839.170780kdump
vmlinuz-2.6.32.43-0.4.1.xs1.8.0.839.170780xen
vmlinuz-2.6-xen
xen-4.1.5.gz
xen-4.1.5.map
xen-4.1.gz
xen-4.gz
xen.gz